Here are some of the most common questions we are asked about bath resurfacing or re enamelling

What areas do you cover?

How long will it take to re enamel my bath?

When can I use the bath again once it's resurfaced?

How long will the new surface last?

What cleaner should I use on my newly resurfaced bath?

What preparation should I do before you arrive?

What is the best time to get the bath done, before or after I re tile?

What Areas Do You Cover?

We cover all of London, the home counties and the whole of the South East of England. So if you live in Richmond, Horsham, Maidstone, Camberley, Brighton or Barnet we will get the job done. We have offices and technicians operating in London, Kent, Brighton, Surrey, Edinburgh, Glasgow, The Scottish Borders, Perth, Fife, Ayr and throughout England and Scotland.

________

How long will it take to do the resurface or re enamel my bath?

Resurfacing will normally take between 5 and 7 hours. If the bath has been reenamelled before it will take 7 hours. If you want us to resurface a sink and toilet at the same time it will definitely be 7 hours.

________

When can I use the bath again once it's been resurfaced?

Once the bath has been resurfaced we ask you to leave it for a further 24 hours. You can relax in your luxury bath by the next evening.

________

How long will the new surface last on my reenamelled bath?

Properly cared for the bath will last in excess of 15 years.

________

What cleaner should I use on my newly resurfaced bath?

Do not use abrasive cream cleaners. Over time they dull the surface. Most liquid cleaners such as “Flash” are fine and one of the best things to use is washing up liquid. Our technician can advice you more fully on the day.

________

What preparation should I do before you arrive?

We just need the bathroom cleared. All your perfume bottles, shampoo bottles and towels etc should taken out of the bathroom.

________

When is the best time to get the bath done, before or after I re tile?

We have resurfaced a bath and the tiler or plumber later damaged the new bath. We can repair this damageif it happens. But that is just an unnecessary additional expense for our customers. So we would recommend you get any work such as this done prior to us arriving to resurface the bath. If you are planning on replacing taps or the plug we would also recommend you do this first. Such things as new flooring can be done before or after we arrive to resurface the bath, depending on personal preference.

________

Should I replace taps or waste prior to the bath being resurfaced?

It is not necessary to replace your taps and waste in order to have yout bath resurfaced. However if you If you want to renew your taps or waste then it is best to do so prior to us coming to reenamel the bath. Also sometimes the new taps or waste are a slightly different size. You can off course change them afterwards but if the bath is then damaged you will end up paying for a repair.

________

Do I need to take the taps and waste off the bath so you can reenamel or resurface my bath for me?

No you don't. We will simply mask the taps and waste for you. We do prefer this if you are not replacing the taps etc. Really just to avoid any accidents occuring in refitting the taps or waste after we have re enamelled the bath.

________

Can you change the colour of the bath

Our most popular request is to re-enamel the colour to white. We can even change the whole bathroom suite to white if requested. We can also colour match your bath to a coloured suite or change it to any colour you wish. We can even do the whole suite black!

________

Can you change the colour of sink or toilet?

Yes. This is proving increasingly popular. Most people do replace the w/c but they like to resurface their wash hand basins as it is in keeping with their bath. Sinks also look great when reenamelled. Our customers are very happy with the transformation.

Changing the colour of a bath and/or sink.

Generally the colour required is made on-site, matching it to an existing coloured fixture. This is quite a time consuming process so it adds a little bit to the price compared to restoring a bath to white.

If you don't require or need you bath resurfaced to match existing fixtures, but just want it coloured (for example, someone requested their bath be resurfaced in black) then the colour can be obtained ready made and this brings costs down.

Resurfacing or painting the outside of the bath:

If you have a roll-top style of bath, then usually the outside of the bath is painted, often in a strong, bold colour.

This is something you can do yourself as the finish on the outside is not as critical as on the inside. The outside is not going to be immersed in water. So although the bath will look fantastic if we resurface the outside for you it is not necessary to use our materials or our specially trained technicians to do so. It is something you can do yourself.

If you do plan on doing the outside yourself, we would recommend not using a high gloss finish as the outside of a cast iron bath is often quite rough and pitted and a glossy finish will just highlight this. A satin finish should look much better.

Also, doing the feet in a different colour helps to draw attention to them, and if you have clawed feet or the like (some of these baths can have quite impressive feet with a surprising amount of detail) then a different colour is really worth considering.

Of course we can also resurface outside the bath for you if you wish. We can do it in whatever colour you desire.

________

What's the difference between re-enamelling, resurfacing and refinishing?

Re-enamelling is an extensive process whereby the bath is taken away and re-enamelled as it would have been done originally. The enamel is vitreous enamel which is a type of glass. The bath will be heated at a very high temperature to melt the vitreous enamel and bond it to the bath. It's not a cheap option.

Bath Resurfacing is a process of repairing any damage to the bath such as chips or lime scale damage. Then a priming agent is applied. Once this is done the new surface is applied. It should be sprayed on. The new surface is not a vitrious enamel. It's a special hard wearing paint. It was initially developed for use on aircraft. Durability is it's calling card. It is also very flexible and very difficult, although not impossible, to chip.

As far asThe Bath Business is concerned we use the best system there is to do the job.

Many other company's use the same system and products as we do.

We pride ourself in excellent workmanship and preparatory work. We also take time to polish the bath once done to ensure a very smooth, shiny and easy to clean surface. We feel, due to the time and care taken to do a good job The Bath Business are the best company to do the job.

We have a very effective bonding agent that ensures the new surface adheres to the old and stays there. The new surface is very, very, very hard wearing and not prone to the damage that can be caused by modern cleaners. Resurfacing can be done in-situ.

In the early 90's when we were first resurfacing baths most resurfacers did describe what they were doing as “re-enamelling”. Not to be deceptive but just to communicate what they were doing. Since that time a couple of new company's have sprung up that do re-enamel. Therefore resurfacing as a term became more common. However some company's do still say they re-enamel when they are really resurfacing. Even we say we are re-enamelling sometimes, just from habit.

If someone says they can come and re-enamel your bath in-situ they mean they can resurface it.

Refinishing is the same process as resurfacing.

 

   read more

 

Should I replace taps or waste prior to the bath being resurfaced?

Do I need to take the taps and waste off the bath so you can reenamel or resurface my bath for me?

Can you change the colour of the bath

Can you change the colour of a bath, sink toilet or shower tray?

Changing the colour of a bath and/or sink

Resurfacing or painting the outside of the bath:

What's the difference between re-enamelling, resurfacing and refinishing

Do you need to bake the bath to get a hard finish?

Why would I have my bath resurfaced?

Why resurface? Why not replace?

Does it smell whilst you are doing the job?

Do you clean up after you?

Do you charge a cancellation fee?

How do I choose a bath resurfacing company?

Is there a Warranty?

Call for a free quote today 00000 555 555